Information on the Model and Parameters of the Cleaner

  Information on the model and parameters of the cleaner:

  Scraper material: determines wear resistance and compatibility. Polyurethane material offers high cost-effectiveness and is suitable for conventional materials like coal and ore; rubber material has good flexibility and is suitable for softer materials like grain and fertilizer; metal material has high hardness and is suitable for removing hard clumps, but it can easily damage the conveyor belt and is only used in special circumstances.

  Adaptation bandwidth: The width of the cleaner must match the width of the conveyor belt; if it is too narrow, it will leave cleaning dead spots, while if it is too wide, it will waste costs and may conflict with the frame. For example, for a 800mm wide conveyor belt, a 800mm specification cleaner should be selected accordingly. Some manufacturers support custom widths.

  Cleaning angle: The recommended contact angle between the scraper and the conveyor belt is 30 degrees. ° -45 ° In between, this angle can ensure the scraping force while reducing the wear on the scraper blade. High-quality cleaners are designed with adjustable angle structures.

  Pressure adjustment method: Spring adjustment has a simple structure and can automatically compensate for scraper wear, making it suitable for small and medium-sized conveyor belts; pneumatic/hydraulic adjustment provides more stable pressure, suitable for large, high-speed conveyor belts, and performs particularly well in dusty and humid environments.

  Installation position: The head cleaner is installed below the unloading roller and is responsible for removing most of the material from the working surface of the conveyor belt; a model with strong wear resistance should be selected. The corner cleaner is used at the turning point of the conveyor belt and needs to match the roller curvature; the roller diameter parameters must be provided when purchasing.